Request an Instant Quote on Raven Electronics Corporation Part Number B421-5100 with the NSN 5905-01-152-4782 Today!

Part Number: B421-5100
Alternate P/N: B4215100
NIIN: 011524782
CAGE Code: 51504
FSG: 59 Electrical and Electronic Equipment Components
Country: USA
NCB Code: 01

When you require Resistor Variable Nonwire Wound components such as part number B421-5100 with the NSN 5905011524782 for your operations, Broadline NSN is your best bet. Whether you are searching for parts from manufacturers like Raven Electronics Corporation or something else, our team is dedicated to helping you acquire what you need with competitive rates and rapid lead times for your benefit. As such, when you have discovered items of interest, we encourage you to take advantage of our rapid RFQ service by filling out and submitting the form featured throughout our website. On this form, be sure to include relevant details such as your desired part quantity and budget parameters so that our dedicated team members can craft a customized solution that suits your particular operational needs.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

At Broadline NSN, we are dedicated to distributing reliable products such as those with the NSN 5905-01-152-4782 or CAGE code 51504. As an AS9120B, ISO 9001:2015, and FAA AC 00-56B accredited parts distributor, you can rely on the caliber of our offerings which feature more than 2 billion new, used, obsolete, and hard-to-find components that are readily available for your purchase at any time. Countless products are subject to rigorous quality control measures to guarantee their fit, form, and function prior to your purchase for your benefit, and all come from leading manufactures like Raven Electronics Corporation. Those looking for high-quality parts like listings belonging to the FSC 5905 Resistors can count on our team to get them what they need in rapid time. Call or email us with any questions and we will be more than happy to assist you through any stage of the procurement process.

NSN Information for Part Number B421-5100 with NSN 5905-01-152-4782, 5905011524782

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-01-152-4782

Item Description:

RESISTOR,VARIABLE,NONWIRE WOUND,

59050115247820NB
CIICHCCESDPMICCriticalityENAC
UBA
Part NumberISCRNVCRNCCHCCMSDSSADC
B421-5100393

Characteristics Data of NSN 5905-01-152-4782, 5905011524782

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1"
AAQLBODY STYLERECTANGULAR"
AARGRELIABILITY INDICATORNOT ESTABLISHED"
ABJTTERMINAL LENGTH0.165 INCHES MINIMUM"
ABWVSHAFT DIAMETER0.095 INCHES NOMINAL"
ABXFSHAFT LENGTH0.060 INCHES NOMINAL"
ADAQBODY LENGTH0.750 INCHES NOMINAL"
ADATBODY WIDTH0.190 INCHES NOMINAL"
ADAUBODY HEIGHT0.250 INCHES NOMINAL"
AEDXSHAFT STYLEROUND, SLOTTED"
AEFDACTUATOR TYPESINGLE SHAFT"
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION5400.0 NOMINAL"
AEFKMAXIMUM STARTING TORQUE5.00 INCH-OUNCES"
AEFLMAXIMUM RUNNING TORQUE5.00 INCH-OUNCES"
AEHTCENTER TO CENTER DISTANCE BETWEEN TERMINALS0.500 INCHES NOMINAL"
APXHTERMINAL LOCATIONLOWER ADJACENT SIDE TWO ROWS"
AXGYMOUNTING METHODTERMINAL"
AYQRCENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS0.100 INCHES NOMINAL"
CBMEIII CUBIC MEASURE0.036 CUBIC INCHES"
CQCCELECTRICAL RESISTANCE PER SECTION10.000 PERCENT, RATED AMPERES C AND BETTER FLOORING"
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG5400.0 NOMINAL"
CQCMCENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.200 NOMINAL INCHES"
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION"
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-100.0/+100.0 SINGLE SECTION"
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS1.0 7TH SECONDARY QUALITY"
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0/+10.0 SINGLE SECTION"
CRSXACTUATOR TRAVEL CONTROL FEATURECLUTCH"
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 SINGLE SECTION"
CSDLUNABLE TO DECODEUNABLE TO DECODE"
TTQYTERMINAL TYPE AND QUANTITY3 PIN"
AAPNSECTION QUANTITY1"
AAQLBODY STYLERECTANGULAR"
AARGRELIABILITY INDICATORNOT ESTABLISHED"
ABJTTERMINAL LENGTH0.165 INCHES MINIMUM"
ABWVSHAFT DIAMETER0.095 INCHES NOMINAL"
ABXFSHAFT LENGTH0.060 INCHES NOMINAL"
ADAQBODY LENGTH0.750 INCHES NOMINAL"
ADATBODY WIDTH0.190 INCHES NOMINAL"
ADAUBODY HEIGHT0.250 INCHES NOMINAL"
AEDXSHAFT STYLEROUND, SLOTTED"
AEFDACTUATOR TYPESINGLE SHAFT"
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION5400.0 NOMINAL"
AEFKMAXIMUM STARTING TORQUE5.00 INCH-OUNCES"
AEFLMAXIMUM RUNNING TORQUE5.00 INCH-OUNCES"
AEHTCENTER TO CENTER DISTANCE BETWEEN TERMINALS0.500 INCHES NOMINAL"
APXHTERMINAL LOCATIONLOWER ADJACENT SIDE TWO ROWS"
AXGYMOUNTING METHODTERMINAL"
AYQRCENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS0.100 INCHES NOMINAL"
CBMEIII CUBIC MEASURE0.036 CUBIC INCHES"
CQCCELECTRICAL RESISTANCE PER SECTION10.000 PERCENT, RATED AMPERES C AND BETTER FLOORING"
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG5400.0 NOMINAL"
CQCMCENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.200 NOMINAL INCHES"
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION"
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-100.0/+100.0 SINGLE SECTION"
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS1.0 7TH SECONDARY QUALITY"
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0/+10.0 SINGLE SECTION"
CRSXACTUATOR TRAVEL CONTROL FEATURECLUTCH"
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 SINGLE SECTION"
CSDLUNABLE TO DECODEUNABLE TO DECODE"
TTQYTERMINAL TYPE AND QUANTITY3 PIN"

Related NSN Components of B421-5100

Semiconductor’s Certifications and Memberships

No China Banner
No China Parts The only independent
distributor with a
NO CHINA SOURCING Pledge
USA Flag Banner
USA Flag
  • All Orders are Fulfilled in the U.S.A.
  • All shipments must comply with U.S.A. export laws.
  • No exceptions.
Fallen Heros Banner
Fallen Heros Fund

“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.

Thank You for Visiting.

If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.